nke DISPLAY (Android et iOS)

With the “PAGE”, “OK” and arrow keys you can change the display, enter the menus, perform sensor calibrations and pilot settings.
The following 6 keys are dedicated to the autopilot. The MOB key, common to all our controls, allows you to trigger an alarm in case of man overboard.


Navigation data display

direct access to essential information

Data recording

for performance analysis

Remote control option

*The Ipad or Iphone also acts as a remote control for the nke displays and Gyropilot

The Multifunction remote control option allows to act on the multifunction by selecting channels you wish to display.
The Gyropilot remote control allows you to control the gyropilot (+1/-1 +10/-10, auto, stop).


The nke Display Pro app connects to the boat via the onboard Wi-Fi network.
In addition to the nke Wi-Fi Box, nke Display Pro allows you to select and display data from any navigation station that transmits NMEA 0183.

The nke Wi-Fi Box allows the application to have bidirectional communication and thus to send commands on the Topline bus, to control the autopilot for example.

By operating in conjunction with the nke Wi-Fi Box, you can make a diagnosis of the instruments present on the Topline bus and check whether the software of your instruments is up to date.

Share This

Share this post with your friends!